Undercoating Spray
Undercoating Spray is designed to provide superior textured protection and long-lasting corrosion resistance on both visible and hidden areas of vehicles. It forms a durable elastic layer that resists stone chips, abrasion, moisture, and harsh weather conditions.
The product is also suitable for use as a moisture-repellent coating on wheel housings and chassis parts. Available in 400 ml spray cans and offered in various colors.
Key Features
- Excellent corrosion protection
- Long-lasting elasticity
- Stone-chip and abrasion resistance
- Sound-deadening effect
- Strong adhesion to multiple surfaces
- Compatible with all paint systems; fully paintable
- Weather-resistant
- Resistant to mild acids and alkaline solutions
- Easy cleaning: wet product cleans with solvent; dry product removes mechanically
- Sprayable, non-sagging, and does not create overspray haze
Suitable For
- Cars
- Vans
- Caravans
- Trucks
- Boats
- Tanks
- Wheel housings
- Chassis and underbody parts
- Wind deflectors and side skirts
Application Instructions
- Clean equipment with solvent while product is still fresh.
- Remove old paint and rust, then sand the surface.
- Ensure the surface is clean, dry, and free of grease.
- The product is ready to spray—no thinner required.
- Shake the can thoroughly before use.
- For 1-liter versions, fill into a compressed-air spray gun.
- Optimal working pressure: 3–6 bar.
- Spray from a distance of approximately 30 cm.
- Apply multiple coats for maximum protection.
- Depending on coat thickness, the surface can be painted after 60–90 minutes.
- For 2-component paint systems, pre-priming with Maxray primer is recommended.
- Allow short drying intervals between thick coats.
- The product does not run, drip, or create a mist during application.
Packing Type
| PRODUCT | VOLUME | PCS |
| UNDERCOATING SPRAY | 400 ML | 12 PIECES |
Request a Quote
Other Products
